SINEWAVE INVERTER SWI SERIES 25KVA

Sine wave Inverters are devices that Transform power from a Battery into the same type of power we get from a typical wall outlet in our Homes or Offices. They Transform direct current (DC) from a Battery into an alternating current (AC). Sine wave Inverters provide extended power backup. This extended power backup helps reduce the utility Bill.

3 Phase IN - 3 Phase Out

Catalogue

Powertek Sine wave Inverter exclusively design to meet instant power requirement against the hazard of power failure in Offices, Commercial Complexes, Hospitals, etc. Sine wave Inverter 3 Phase Input and 3 Phase output suitable for domestic load like Lighting, Fans, Air coolers, Air conditioners etc. Powertek Sine wave Inverter works on PWM technology. It has wide input range of 380V to 440V.

Pure Sine wave Output

Noiseless working

Fully Automatic

Pollution Free

Economic

Pure Sine Wave Output

Powertek Sinewave Inverter gives a Microcontroller,PWM Technology Based Pure Sinewave output with high reliability and Efficiency.

User Configurable Parameter

This features makes our system user friendly. Dealer can change the parameters according to their requirement. We are giving the following parameter which are configurable through jumpers given on board.

1. Output voltage 2. Charging Voltage 3. Charging current 4. Input Voltage Range

PRODUCT DETAILS
Product name	SINEWAVE INVERTER
Series	SWI Series
Model No.	Z 25
Rating	25 KVA
Operating DC voltage	360V
No. of Batteries	30
INPUT MAINS MODE
No of Phase	3 Phase - 4 Wire R, Y, B, N
Voltage Range	380V - 440V
Mains Low Recovery Range	10V
Mains High Recovery Range	10V
Frequency Range	47 - 57 Hz
Battery Charging Stages	3
INVERTER MODE
Switching Power Device	IGBT
Control	PWM
Output voltage	400V AC +/- 1%
Phase	3 Phase - 4 Wire R, Y, B, N
Output Waveform	Pure Sine Wave
Frequency	50 Hz
Changeover UPS to Mains	20ms
Changeover Mains to UPS	15ms
Rated Output Power Factor	0.8
Switch	START, STOP, RESET, SCROLL
LED Indication	Mains ON , Charging ON, Inverter ON , Low Battery, Overload,Output low, InverterTrip.
Display	Input Voltage, Output Voltage, Output Current, Output Frequency, DC Voltage, Charging Current.
Alarm	Battery Low, Overload, Charger ON.
Protection	Overload, Short Circuit Protection, Over Voltage, Mains Surge , Over Temperature Protection Under Voltage and Over Voltage Protection
Operating Temp	0 - 50°C
Operating Humidity (RH Value)	< 90
Protection Class	IP 20
Low Cut Off	10.5V/Batt. +/- 2%
Min Low Buzzer	10.75V/ Batt. +/- 2%
High Cut Off	14.5V/Batt. +/- 2%
High Cut off Recovery	12V/ Batt. +/- 2%
Low Cut off Recovery	12V/ Batt. +/- 2%
Charging Current by Grid	5 Amp. to 10 Amp.