LIFT UPS - 5 HP

A Three Phase Lift UPS is basically a type a UPS which provides Three Phase output along with a Neutral. It has Three main parts; an Intelligent Battery Charger, Batteries and a Three Phase Inverter. It runs the Three Phase Electrical motors and machinery in the case of any Power failure. It automatically acts upon any grid malfunction/failure by sensing it and gives the power from the battery back up system.

1 Phase IN - 3 Phase Out

Catalogue

POWERTEK 1Phase Input and 3 Phase output LIFT UPS is specially designed to run three phase electrical motors by handling high inrush current of the motors. It proves to be a helping hand to convert 1Phase to 3 Phase by generating 3 Phase 4 wires continues output supply from its DSP Based Inverter system. Powertek Lift UPS is embedded with Isolated buck charging technology which provides constant charging voltage & current when Grid is available. It also senses the Grid failure & starts automatically by utilizing the energy stored in the battery back-up system. 3 Phase Lift UPS is capable of driving Lifts / Elevators & other 3 Phase machines. These three Phase UPS are designed to ensure uninterrupted three Phase supply to Lifts where three Phase Grid power is not available.

KEY FEATURES

* Advance Operation Mode

* Compatible with Generator

* Pure Sinewave Output

* Easy Installation

* Long Run Battery

* Complete Installation support by Industry experts

* Improved charge for Low AH Batteries.

PRODUCT DETAILS
Product name	LIFT UPS
Series	PRO Series
Model No.	PRO ZX 05
Rating	5 HP
Operating DC voltage	180V
No. of Batteries	15
MAINS MODE
No of Phase	1 Phase - 2 Wire P, N
Voltage Range	170V - 270V AC
Main low Recovery Range	10V
Main High Recovery Range	5V
Frequency Range	50 Hz +/- 3%
Battery Charging Stages	3
INVERTER MODE
Switching Power Device	IGBT MODULE
Control	PWM
Output voltage	400V AC +/- 1%
Phase	3 Phase - 4 wire R, Y, B, N
Output Waveform	Pure Sine Wave
Frequency	50 Hz (Free running)
Changeover Time UPS/ARD to Mains	0ms
Changeover Time Mains to UPS/ARD	0ms
Rated Output Power Factor	0.8
Switch	LIFT UPS ON/OFF
LED Indication	Mains ON, Charging ON, UPS ON, Low Battery, Over Load
Alarm	Battery Low, Overload, Charger ON
Protection	Overload, Short Circuit Protection, over Voltage, Mains Surge and Transient Protection (MOV Varistors), Reverse Polarity of Batt., Over Tempeature Protection Under Voltage and Over Voltage Protection.
Operating Temp	0 - 50°C
Operating Humidity (RH Value)	< 95
Protection Class	IP 20
Low Cut Off	10.5V/Batt. +/- 2%
Battery Low Buzzer	10.75V/ Batt. +/- 2%
Low Cut off Recovery	12V/ Batt. +/- 2%
High Cut Off	15.5/Batt. +/- 2%
High Cut off Recovery	15.0/Batt. +/- 2%
Charging Current by Grid	As per Battery AH
AC OUTPUT
Output @ No. Load	400 +/- 2%
Output Freqency	50Hz +/- 2%
Output @ Full Batt. to Low Batt.	400 +/-
Output Low Cut	330V
Output High Cut	450V
Output Low Retry	1 Time
Output Short Circuit	1 Time
UPS/ARD Backup Time	3 Minutes
Overload	As per Rating
CHARGER
Switching Element	IGBT
Control Type	Microcontroller
Type of Charger	PFC
Efficiency	95%
Battery Charging Stages	3 Stage Battery Charging to Keep Batteries Ready for Rescue
Power Factor	0.8