LIFT UPS - 10 HP

An Elevator UPS or Lift UPS is Basically a type an offine UPS which has three main parts, A Charger, Batteries and An Inverter. It takes Three Phase supply and Powers the Elevator while charging the Batteries at the same time. It acts as an effective Power backup solution for Elevators.

1 Phase IN - 1 Phase Out

Catalogue

POWERTEK Lift UPS is specially designed to run electrical motors by handling high inrush current of the motors. It proves to be a helping hand during Grid absence by generating 1 Phase 2 wires output supply from its back-up system. Powertek Lift UPS is embedded with Isolated boost charging technology which provides constant charging voltage & current when Grid is available. It also senses the Grid failure & starts automatically by utilizing the energy stored in the battery back-up system. Lift UPS is capable of driving Lifts/Elevators.

KEY FEATURES

* Advance Operation Mode

* Compatible with Generator

* Pure Sinewave Output

* Easy Installation

* Long Run Battery

* Compact size also avilable in wallmounting Cabinet

* Complete Installation support by Industry experts

* Improved charge for Low AH Batteries.

PRODUCT DETAILS
Product name	LIFT UPS
Series	ACE Series
Model No.	VX - 10
Rating	10 HP
Operating DC voltage	72V
No. of Batteries	6
MAINS MODE
No of Phase	1 Phase - 2 Wire P, N
Voltage Range	165V - 270V AC
Main low Recovery Range	10V
Main High Recovery Range	5V
Frequency Range	50 Hz +/- 3%
Battery Charging Stages	3
INVERTER MODE
Switching Power Device	Mosfet
Control	PWM
Output voltage	230V AC +/- 2%
Phase	1 Phase - 2 wire P, N
Output Waveform	Pure Sine Wave
Frequency	50 Hz (Free running)
Changeover Time UPS/ARD to Mains	Three second
Changeover Time Mains to UPS/ARD	<10ms
Rated Output Power Factor	0.8
Switch	UPS ON/OFF
LED Indication	Inverter ON, Batt. Low,/High, Overload, Mains Charging ON, Mains ON .
Alarm	Battery Low, Overload, Charger ON, Inverter ON
Protection	Overload, short Circuit Protection, over Voltage, Mains Surge and Transient Protection (MOV Varistors), Reverse Polarity of Batt., Over Tempeature Protection Under Voltage and Over Voltage Protection.
Operating Temp	0 - 50°C
Operating Humidity (RH Value)	< 95
Protection Class	IP 20
Low Cut Off	10V/Batt. +/- 2%
Battery Low Buzzer	10.5V/ Batt. +/- 2%
Low Cut off Recovery	12V/ Batt. +/- 2%
High Cut Off	15.5/Batt. +/- 2%
High Cut off Recovery	15.0/Batt. +/- 2%
Charging Current by Grid	1 to 3 +/- 2% (Selectable)
OUTPUT
Output @ No. Load	220 +/- 2% , 230 +/- 2%
Output Freqency	50Hz +/- 2%
Output @ Full Batt. to Low Batt.	220 +/- 2% , 230 +/- 2%
Output Low Cut	165V
Output High Cut	270V
Output Low Retry	1 Time
Output Short Circuit	5 Time
UPS/ARD Backup Time	3 Minutes
No Load Batter Current	2%
Overload	3.6A/KVA
CHARGER
Switching Element	Mosfet
Control Type	Microcontroller
Type of Charger	Booster
Efficiency	95%
Battery Charging Stages	3 Stage Battery Charging to Keep Batteries Ready for Rescue
Power Factor	0.8